Slow is a modified Aliphatic Amine adduct, developed for slow, room temp cure.
Features very low viscosity, low odor, 35-45 minute gel time at 72F with set time of 4 hours at 77F.
Reduced vapor pressure, low shrinkage, good chemical resistance, high clarity
Uses include hand layup laminating, marine construction, tooling, epoxy face coats, hi-performance parts, kit aircraft, RTM/Vacuum bagging.

Flash Point: ASTM D-3278, 77 ° F >200
Mix 4:1 ratio, Orca 1300 series epoxy 25:100
Gel Time 77Ú F 30-35 minutes

Handling Properties at 77 °F:
Mixed Viscosity 3200 cps (Orca 1300)
Pot Life at 77 ° F 30-35 minutes (Orca 1300) @ 25:100

Cured Resin:
Heat deflection temperature, °F 143.1
Tensile Strength 11947.6 PSI
Flexural Strength 19912.7 PSI
Flexural Modulus 526263.7 PSI
Barcol Hardness(934-1) 41

Data Sheet 4:1 Slow
MSDS #21

All epoxy Resin/ Curing Agents, should be kept in tightly closed containers in a cool, dry place. Product will absorb moisture and carbon dioxide which may affect viscosity or create foaming when reacted with Resin/Curing Agents. This product will have a minimum shelf life of one year if properly stored in unopened containers To ensure maximum stability and maintain optimum resin properties, resins should be stored in closed containers at temperatures below 75°F and away from heat sources and sunlight