Clear Coat: UV Stable, 1/2 gal Kit (1 quart epoxy + 1 quart hardener)
100% solids UV stable, two part polymer epoxy
Extremely clear, tough, high gloss surface coating formulated to produce a deep glass like appearance in a single layer on a sealed surface. Two or more layers are often applied for added depth and protection. Formulated for improved UV resistance to reduce yellowing and surface degradation from UV exposure. Has an extended "open time" which allows up to 5 minutes in the mixing container at 70º F and up to one hour working time on the surface being coated. Waterproof, heat & alcohol resistant. This coating is recommended for interior and exterior commercial and residential projects.

A/B Mix Ratio: 1:1

Thin Film Set Time/Hour: 5

Durometer Hardness: 78 +/- 3
2 Hours @ 60º C)

Tensile Strength: 3390

Tensile Modulus: 261,500

Tensile Elongation %: 24

Flexural Yield Strength : 6752

Flexural Yield Strain; 5.8

Flexural Yield Modulus: 197,848

Tg - ºC: 53

Viscosity CPS @ 77º F:
Resin (A) 3500
Hardener (B) 1400

Density (lbs/gal):
Resin (A) 9.64
Hardener (B) 8.05

VOC (grams/liter): 0

Gel Time (minutes) 51+/-3
(100 gram mass @ 22º C)
MSDS